HRT/D300 and HRP/D300 Auto Feed Plastic Bending Machines

HRP/D300 and HRT/D300 are Shannon’s auto feed models.

Prices start at $20,600

Description

Auto Feed Models
HRT/D300 and HRP/D300

HRP/D300 and HRT/D300 are Shannon’s auto feed models.

The HRP/D300 is constructed with similar features to the HRP with two major differences. The HRP/D is equipped with an automatic feed system. Using a pneumatic controlled feeder with a conveyor belt, the HRP/D feeds material through the machine at up to 40 ft. per minute. This is perfect for manufacturing large quantities of display type products. The HRP/D’s top is shorter than the bottom to allow room for the feeder system (6.5’). Wire heat, top dwell timing, wire height, and position are adjustable. The machine comes complete with rollers on the top frame to help material through for faster production.

The HRT/D300 is built to the same specifications as the HRP/D without the top heating option. This allows for a more economical, large format automatic feed heat table. This model is perfect for fast production of thinner material. This model is fully adjustable for wire position, heat, and height.

Specs for Auto Feed Models:
HRT/D300
Max working length 118″ / 3000 mm
Standard sheet thickness .01″- .4″ / 0,3 – 25 mm
Max heating units 4
Distance between wires .78″ – 39.3″ / 20 – 1000 mm
Feed speed 0 – 39.37 ft/min   /  10 -12 m/min
Electrical requirements 220 V – 230 V
Shipping weight 1036 lb / 470 kg

HRP/D300
Max working length 118.11″ / 3000 mm
Standard sheet thickness .01″ – .98″ / 0,3 – 25 mm
Max heating units 8
Distance between wires  .78″ – 39.3″ / 20 -1000 mm
Feed speed 0 – 39.37 ft/min    /   10 -12 m/min
Electrical requirements 220 V – 230 V 3ph
Shipping weight 1653 lb / 750 kg
Prices start at $20,600

Reviews

There are no reviews yet.

Be the first to review “HRT/D300 and HRP/D300 Auto Feed Plastic Bending Machines”

Your email address will not be published. Required fields are marked *