EF-200 Diamond Edge Finisher
|
The EF-200 Diamond Edge Finisher Machine removes saw marks and produces a clear, polished edge on acrylic parts...all in a single pass through the machine.
Single or mulitple workpieces are fed by two constant tension precision gear driven belt assemblies across a special diamond cutter mounted on a high speed super precise 21,000 RPM spindle.
Feed rate is infinitely variable from 1-10' per minute via a DC speed control. The feed belt assemblies can swing out to permit easy access to the cutter and are completely protected by safety guards.
A complete set of tools for setup, adjustment and operation is furnished with each machine, along with a depth indicator and base for setting cutter height.
|
EF-200 Machine Specifications:
|
Machine Table Size:
| 13" x 22"
| 330mm x 560mm
|
Available Track Length:
| 46"
| 1170mm
|
Maximum Workpiece Dimensions:
| 2' x 8' x 3/4" thick
| 610 x 2440 x 20mm
|
Spindle Speed:
| 21,000 RPM
| 21,000 RPM
|
Spindle Drive Motor:
| 0.75 HP
| .55 Kw
|
Constant Tension, Dual Belt Feed:
| Standard
| Standard
|
Feed Speed (infinitely adjustable):
| 0-10' per minute
| 0-3 meters per minute
|
Feed Belt Motor:
| 1/20 HP DC
| .04 Kw
|
Electrical Requirements:
| 220V, 1ph, 15 Amp, 60Hz 220V, 1 ph, 15Amp, 60Hz
|
|
Overall Machine Dimensions (without track extensions):
|
Length (side to side):
| 22"
| 560mm
|
Width (front to back):
| 13"
| 330mm
|
Shipping Weight:
| 95 lbs.
| 43 Kg
|
Shipping Dimensions:
| 26" x 16" x 20"
| 660 x 406 x 508mm
|
|
