EF-200 Diamond Edge Polisher
The EF-200 Diamond Edge Polisher Machine removes saw marks and produces a clear, polished edge on acrylic parts...all in a single pass through the machine.
Single or mulitple workpieces are fed by two constant tension precision gear driven belt assemblies across a special diamond cutter mounted on a high speed super precise 24,000 RPM spindle. Feed rate is infinitely variable from 1-10' per minute via a DC speed control. The feed belt assemblies can swing out to permit easy access to the cutter and are completely protected by safety guards.
A complete set of tools for setup, adjustment and operation is furnished with each machine, along with a depth indicator and base for setting cutter height.
Specifications
Machine Table Size:
13" x 22"
330mm x 560mm
Available Track Length:
46"
1170mm
Max. Workpiece Dimensions:
(longer parts can be run)
2' x 8' x 3/4" thick
Overall Machine Dimensions (w/out track extensions):
Length (side to side):
22"
Width (front to back):
13"
Height (incl. support columns):
17-3/4"
Spindle Speed:
24,000 RPM
24,000 RPM
Feed Speed (infinitely adjustable):
0 - 10' per min.
Feed Belt Motor:
.2 HP DC
.15 Kw
Spindle Drive Motor:
.75 HP
0.6 Kw
Electrical Requirements:
220V, 1PH, 5 amps, 60Hz
Shipping Dimensions:
26" x 16" x 20"
660 x 406 x 508mm
Shipping Weight:
95 lbs.
43 Kg
Owner's Manual (PDF)
Parts List
The EF-200 Diamond Edge Polisher Machine removes saw marks and produces a clear, polished edge on acrylic parts...all in a single pass through the machine.
Single or mulitple workpieces are fed by two constant tension precision gear driven belt assemblies across a special diamond cutter mounted on a high speed super precise 24,000 RPM spindle. Feed rate is infinitely variable from 1-10' per minute via a DC speed control. The feed belt assemblies can swing out to permit easy access to the cutter and are completely protected by safety guards.
A complete set of tools for setup, adjustment and operation is furnished with each machine, along with a depth indicator and base for setting cutter height.
Machine Table Size:
13" x 22"
330mm x 560mm
Available Track Length:
46"
1170mm
Max. Workpiece Dimensions:
(longer parts can be run)
(longer parts can be run)
2' x 8' x 3/4" thick
Overall Machine Dimensions (w/out track extensions):
-
Length (side to side):
22"
-
Width (front to back):
13"
-
Height (incl. support columns):
17-3/4"
Spindle Speed:
24,000 RPM
24,000 RPM
Feed Speed (infinitely adjustable):
0 - 10' per min.
Feed Belt Motor:
.2 HP DC
.15 Kw
Spindle Drive Motor:
.75 HP
0.6 Kw
Electrical Requirements:
220V, 1PH, 5 amps, 60Hz
Shipping Dimensions:
26" x 16" x 20"
660 x 406 x 508mm
Shipping Weight:
95 lbs.
43 Kg
Owner's Manual (PDF)